Budmaster HPS-2
  

Budmaster HPS-2

Our Price:  £340.00
List Price:  £390.00
Saving Of:  13%
(inc 20% VAT)

Bar Code:  635346597800
LED's:  38 x Osram SSL Horticultural LED
PPF (Total):  116.8Ámol
PPF (Efficiency):  1.3Ámol/j
Energy Used:  89.8w
Input Voltage:  100 - 240v
Amps:  0.4 Amps
Dimensions:  19 x 32 x 6cm
Warranty:  5 Years

Weight:  3kg

Availability:  

In stock, immediate despatch  


Budmaster HPS (High Pressure Sunlight) Enhanced White Spectrum

Budmaster HPS (High Pressure Sunlight) has been designed to give the best of both worlds to growers who wish to grow under a primarily white light source to provide an exceptional lamp that will provide a repeatable yield year on year.

By combining a flat sunlight like peak for all colours and then boosting the primary photosynthesis driving colours of blue and red to ensure maximum photosynthesis and phytochrome stimulation, and course the infra-red has been kept in check to stop your plants stretching too much.

Our superior build  ensures that our lamps continue to give you repeatable and reliable results year on year by dropping less than 1% output per year. 

Our lamps are all UK designed and built ensuring the highest quality standards available in the industry, this shows in the durability and longevity of our light engines, in 4 years of trading we have not lost a single osram diode to failure of any kind and have thousands of very happy customers all over the globe.

Our custom built secondary lens ensures that an absolute minimum of light is wasted on reflectance (6% – 20% can be wasted on reflectance from walls).

Click here for Photometric readings for our HPS light engines, ies and elumdat files available upon request.

HPS-2 PPFD Map
Spectral Output for Budmaster HPS Spectral Output for market leading 600w HPS

Osram SSL Horticultural LED

With Osram led's every diode can be guaranteed to hit the exact wavelength and bandwidth that are needed for optimal photosynthesis as they are specifically designed for horticulture.

With the Osram led’s that we are using they are designed to be on for long periods of time and have a lifespan of double a normal led at a staggering 100,000 hours with very minimal drop in output over time of less than 1% per year with our cooling system.

In fact these led’s are so good that they are guaranteed to never drop below 25% of their overall output within their lifespan.

So with a combination of 6 different osram diodes in our custom ratio we create a perfect multi spectrum for growh and bloom giving you a one light fits all solution to simplify your indoor medical grow areas.

Different ratios can be ordered for custom projects for where our standard ratio is not suitable.

Designed, Tested and Manufactured in the UK

We design all our lamps from the ground up here in our base in North Wales and we source primarily UK manufacturers for components and raw materials.

Our lamps are then manufactured to exacting standard by Marl International (www.leds.co.uk) in Cumbria.

One of the reasons we picked Marl to manufacture our PCB and lamps is simply that they are the best that Europe has to offer and have been working in the led industry since 1970.

With highly skilled and conscientious staff at every level of their business they truly work as one large family all focused on led perfection, couple this with their state of the art SMT centre running three complete production line SMT systems and the end results is truly exceptional.

Every step of every process is documented and tested thoroughly to comply with ISO 9001, CE, ROHS and CUL / UL legislations ensuring a 100% safe and quality end result. For example every single board that is produced for us is then tested in a purpose built jig to ensure high quality standards and then each board in each batch is allocated and assessed individually before being signed off by an experienced operator.

 
SMT Line Boards Going In SMT Line Board Hopper SMT Batch Setup
     
Populated Boards Emerge Boards are sent to the Oven Boards Emerge with LED Firmly Adhered
     
Each Jig is Tested Test Jig Multiple  

Here at Budmaster LED we design our lights with the grower and the space they are trying to cover in mind. For example all of our Budmaster lamps are specifically designed to fit certain common grow tent areas such as 120cm x 120cm x 200cm.

Using effective vertical penetration with our custom lens we ensure the target area has effective PPFD levels whilst minimizing reflectance from the surrounding area to increase efficiency by up to 10%

We generally recommend that your plants grow no closer than 2ft to the light to make best use of the output, however strong healthy plants can grow right into the light with very little adverse effect on the plants.

To get the right amount of light to your plants at the right time consult the chart below.

 
Measuring Average PPFD

You will see many companies displaying PPFD reading from a quantum meter on their websites either via a central point measurement or a PPFD grid.

Quantum / PPFD meters are not a very accurate way of ascertaining average PPFD levels but are intended for doing basic field measurements of a single point which is not indicative of your overall PPFD.

If the spectral power distribution (SPD) of a light source is known across the relevant wavelengths (400-700 nm), then the amount of photosynthetic energy available to plants can be determined.

Based on its SPD, a light source will have a conversion factor that can be used to translate luminous flux density (illuminance) received by the plant into photosynthetic photon flux density (PPFD), in μmol/s-m2.

Click here for the Mathematical Basis for the Calculation of PPFD.

 
Getting the Right Average PPFD for Your Environment

It is of course very important that you use your lamps in the best way possible to get the most out of your grow room, with that in mind please refer to the guide for recommendations on the hanging distance of our lamps.

Of course you may find that by adding additional carbon dioxide you can increase the amount of available light to your plants.

Click the lamp description links to see PPFD maps.

Growth Stage Minimum Levels Required µmol/m2/s
  (Average Across Full Working Plane)
Vegatative 200 - 300 µmol/m2/s
Early Bloom 300 - 400 µmol/m2/s
Final Bloom 500 - 600 µmol/m2/s
Exceptional Bloom 600 - 800 µmol/m2/s
 
Lamp Growth Stage Power Minimum Required µmol/m2/s Average PPFD Across 1.2sqm Area µmol/m2/s
Budmaster G.O.D-9 Vegatative 166w 100 - 300 µmol/m2/s 426µmol/m2/s at 120cm from Light Source
  Early Bloom 373.5w 300 - 400 µmol/m2/s 867µmol/m2/s at 90cm from Light Source
  Final Bloom 373.5w 500 - 600 µmol/m2/s 952µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 373.5w 600 - 800 µmol/m2/s 1008µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 1sqm Area µmol/m2/s
Budmaster G.O.D-6 Vegatative 124.5w 100 - 300 µmol/m2/s 418µmol/m2/s at 120cm from Light Source
  Early Bloom 249w 300 - 400 µmol/m2/s 784µmol/m2/s at 90cm from Light Source
  Final Bloom 249w 500 - 600 µmol/m2/s 869µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 249w 600 - 800 µmol/m2/s 985µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 1sqm Area µmol/m2/s
Budmaster G.O.D-4 Vegatative 84w 100 - 300 µmol/m2/s 240µmol/m2/s at 120cm from Light Source
  Early Bloom 166w 300 - 400 µmol/m2/s 552µmol/m2/s at 90cm from Light Source
  Final Bloom 166w 500 - 600 µmol/m2/s 615µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 166w 600 - 800 µmol/m2/s 724µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 80 x 40cm Area µmol/m2/s
Budmaster G.O.D-2 Vegatative 83w 100 - 300 µmol/m2/s 395µmol/m2/s at 120cm from Light Source
  Early Bloom 83w 300 - 400 µmol/m2/s 591µmol/m2/s at 90cm from Light Source
  Final Bloom 83w 500 - 600 µmol/m2/s 808µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 83w 600 - 800 µmol/m2/s 865µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 1.2sqm Area µmol/m2/s
Budmaster HPS-9 Vegatative 200w 100 - 300 µmol/m2/s 296µmol/m2/s at 120cm from Light Source
  Early Bloom 360w 300 - 400 µmol/m2/s 496µmol/m2/s at 90cm from Light Source
  Final Bloom 360w 500 - 600 µmol/m2/s 539µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 360w 600 - 800 µmol/m2/s 576µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 1sqm Area µmol/m2/s
Budmaster HPS-6 Vegatative 120w 100 - 300 µmol/m2/s 240µmol/m2/s at 120cm from Light Source
  Early Bloom 240w 300 - 400 µmol/m2/s 440µmol/m2/s at 90cm from Light Source
  Final Bloom 240w 500 - 600 µmol/m2/s 486µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 240w 600 - 800 µmol/m2/s 547µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 1sqm Area µmol/m2/s
Budmaster HPS-4 Vegatative 160w 100 - 300 µmol/m2/s 309µmol/m2/s at 120cm from Light Source
  Early Bloom 160w 300 - 400 µmol/m2/s 319µmol/m2/s at 90cm from Light Source
  Final Bloom 160w 500 - 600 µmol/m2/s 362µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 160w 600 - 800 µmol/m2/s 413µmol/m2/s at 30cm from Light Source
         
        Average PPFD Across 80 x 40cm Area µmol/m2/s
Budmaster HPS-2 Vegatative 80w 100 - 300 µmol/m2/s 220µmol/m2/s at 120cm from Light Source
  Early Bloom 80w 300 - 400 µmol/m2/s 338µmol/m2/s at 90cm from Light Source
  Final Bloom 80w 500 - 600 µmol/m2/s 480µmol/m2/s at 60cm from Light Source
  Exceptional Bloom 80w 600 - 800 µmol/m2/s 513µmol/m2/s at 30cm from Light Source
         
         
 

Integrated Sphere and Goniophotometer report for Budmaster HPS Light Engine


Continue ShoppingTell a Friend