Budmaster GOD-9

Our Price:  £1,550.00 (inc 20% VAT), £1,291.67 (ex VAT)
VAT only applicable to EU Residents

Bar Code:  635346597428
LED's:  225 x Osram SSL80 Horticultural Family
Coverage:  120 x 120cm
Energy Used:  405w
Input Voltage:  100 - 240v
Frequency:  50 - 60 hz
Current:  600ma
Voltage:  70v
Amps:  1.69 Amps
Dimensions:  48 x 49 x 6cm
Warranty:  3 Years
3D Model:  Click Here for Interactive 3D Model
Datasheet:  Click Here to Download Datasheet
Energy Used in 1 Year (5145hrs):  784.5 kWh/(a * m2)
600w HPS Energy Used in 1 Year (5145hrs):  1345.7 kWh/(a * m2)

Weight:  9kg

Availability:  

In stock, immediate despatch  

  (4 Reviews)

With our Osram Delux Gold (G.O.D) led grow lights we have truly eclipsed every other light in the cosmos, with superior quality German engineering these Osram led's really are the best that money can buy with many additional features that come together to bring a truly remarkable end product. Osram led's are made in Germany with the highest possible quality standards and controls and are all UL / CUL certified and have many additional features over conventional led.

GOD-9 Light Simulation Market Leading HPS Light Simulation
Illuminance
Spectral Output for Budmaster GOD Spectral Output for Marketing Leading 600w Dutch HPS
Exact Horticultural Wavelengths with the Osram SSL80 Family Osram LED

With Osram led's every diode can be guaranteed to hit the exact wavelength and bandwidth that are needed for optimal photosynthesis as they are specifically designed for horticulture. For example most led’s are made for industrial, commercial or domestic applications and they measure their drop in output over time based on a short general usage time.

So for example, a Cree or Bridgelux diode designed to be used in flood lighting or car headlights will drop output considerably when used for horticulture as these type of diodes are only expected to be on for 2-3 hours maximum at a time not for between 12 – 20 hours at a time.

With the Osram led’s that we are using they are designed to be on for long periods of time and have a lifespan of double a normal led at a staggering 100,000 hours with very minimal drop in output over time of less than 1% per year with our cooling system.

Ultimate Reflection Performance > 99% Diffuse Reflectivity M4 Extreme Reflection

Included in each light engine as standard is M4 MCPET which is the most reflective material available on the market made from microcellular foamed sheets.

A microcellular foamed sheet is a foamed body that contains air bubbles of sizes of several µm.

The light reflects randomly on the bordering surface between the air and PET, resulting in excellent light reflecting performance.

Not only does this mean more light out to your plants giving a more efficient lamp but it also means less light back into your lamp meaning less heat and a longer lifespan.

 

Triple Layer UK Made Rugged and Dependable MCPCB

The PCB (Printed Circuit Board) is the most integral part of the led lamp even more so than the diodes themselves as this is the first point of contact for processing the heat from the led effectively.

We use a triple layer MCPCB (Metal Core Printed Circuit Board) for maximum strength and heat dissipation with an aluminum base layer, on the reverse of the MCPCB are thermal pads to effectively mate the board to the heatsink eliminating any possible thermal spikes.

All components are of course of the highest quality and built to last Class 6 components which come with UL and ROHS Certification.

Strong, Durable and Precise UK Made Optics

And of course we have our optics made in North Wales just one mile from our base this allows us to have full control over the materials used to ensure that each and every batch is identical and of course reduces our Carbon Footprint.

Our lens has many advantages over the individual led lens that you see in use in many lamps, these individual lens are generally designed for downlights etc and are not designed to be used for up to 20 hours per day so the materials they use will degrade over time by up to 60% of the transmission rate in tests we have performed.

Solid sturdy and fire retardant UL approved materials are used to make our optics and our expertise has created a lens with multiple points of control ensuring that all the light output gets to your plants whilst maintaining minimum refraction and maximum transmission over the years.

UK Made Aluminium Pin Fin Heat Sinks

And of course we have our heat sinks made here in North Wales next door to our base this allows us to have full control over the materials used to ensure that each and every batch is identical.

  1. Earth Friendly Aluminum for light weight and maximum heat transference.
  2. Maximum surface area using pin fins allow free air flow in any direction while transferring more heat faster.
  3. Strong and Durable design with no sharp edges.
  4. Fits any standard 80mm fan perfectly.

 

Durable and Tough Chassis

And of course we have our cases made here in the UK, this allows us to have full control over the materials used to ensure that each and every batch is identical and of course reduces our Carbon Footprint.

  1. Tough 1.2mm thick steel case:
    1. Nut inserts and Hank bushes are used to ensure an exact fit.
  2. Fibre laser cutting for accuracy of up to 0.25mm and sealing of cut edges to prevent oxidisation etc.
  3. High end reflective powder coating finish:
    1. UV proof.
    2. Water proof.
    3. Grease proof.
    4. Heat Resistant.
    5. No oxidisation in marine environments.
Tried, Tested and Dependable Drivers

High quality tried and tested drivers are used in all our Budmaster LED lamps, we have been using the same drivers for three years now and run at a 0.5% failure rate. So long story short we use good drivers that rarely fail.

We use high quality constant current led drivers each of which has its own 12v fan output allowing us to have a more modular and build and better overall redundancy model in our lamps.

All drivers include industry standard and UL approved connectors from TE and JST.

Waterproof and Low Noise Fans

Noise is the most common issue that growers have to contend with when purchasing high powered led lamps, with this in mind we have designed our cooling system using low noise fans high output UL approved fans:

  1. Waterproof IP68 rating.
  2. UL, ROHS CE approved.
  3. 26 Decibels.
  4. 2500 RPM.
  5. 33.56 CFM.
  6. JST Connector.
Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
Incredible results
Friday, 11 March 2016  | 

Had 2 x 600w hps in a 1.2 x 2.4 tent, swithced to 2 x GOD-9 and now I am getting 6 ounces more bone dry harvest than before

These lights really do pay for themselves fast.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Rating:  
Incredible Oil
Friday, 9 January 2015  | 

Wow what can I say such a huge increase in the oil content I have never seen so much crystal on my plants. Thumbs up from me

Was this helpful to you?  Yes  /  No

1 of 2 people found this review helpful.


Rating:  
Ive stuck Oil
Tuesday, 21 October 2014  | 

Seriously cant believe the amount of extra sugar on these babies and the density and bud size is extreme to say the least.

Worth every penny bravo Budmaster

Was this helpful to you?  Yes  /  No

3 of 6 people found this review helpful.


Rating:  
Wow!!!!!!!!!!!!!!!!!!!!
Sunday, 19 October 2014  | 

Wow!!!!!!!!!!!!!!!!!!!!
The buds are double what I normally get!

Was this helpful to you?  Yes  /  No

3 of 5 people found this review helpful.

Here at Budmaster LED we design our lights with the grower and the space they are trying to cover in mind. For example all of our lights are specifically designed to fit certain common growing areas such as 80cm x 80cm, 1.2m x 1.2m and 1.5m x 1.5m.

We generally recommend that your plants grow no closer than 2ft to the light to make best use of the output, however strong healthy plants can grow right into the light with very little adverse effect on the plants.

To get the right amount of light to your plants at the right time consult the chart below.

Seedling Stage average light required = 50µmol/m2/s  
Vegetative Stage average light required = 200 – 400µmol/m2/s
Bloom Stage average light required = 800 – 1000µmol/m2/s
Over 1000µmol/m2/s then add carbon dioxide to see a huge increase in yield.

So by consulting the chart below we can see that in bloom for best results the COB-X-9 should be around 18 inches above the canopy and the GOD-9 should be 3ft above the canopy.
 
Budmaster PPFD Readings
 
 

Customers who bought this item also bought:


Continue ShoppingTell a Friend